dimensions are shown in mm dimensions subject to change www.ittcannon.com contacts copper alloy plating contact area : gold over nickel terminals : tin lead (2 min) moldings thermoplastic ul 94v-0 rated number of contacts 8 mechanical life 100,000 cycles min card insertion force 10 n max card extraction force 1 n min / 10 n max contact force 0.15 n min / 0.35 n max vibration frequency 10 to 500 hz. acceleration 50m/s 2 duration 6 hours - amplitude 0,35 mm max electrical discontinuity 1? shock peak value 500 m/s 2 ?duration 11 ms 3 shocks in each direction of each axis max electrical discontinuity 1 ? insulation resistance 1,000 m ? min resistance 100 m ? max current rating 10 ? min / 1 a max dielectric strength 750 vrms min card detection switch normally open contact resistance 100 m ? max dielectric strength 250 vrms min current rating 1 ma min / 10 ma max maximum power 0.2 va operating temperature -40? to +85? soldering temperature wave: 260? / 5 sec damp heat iec 512 test number 11c (10 days) salt mist iec 512 test number 11f (96 hours) card detection switch sealed ip 54 30 per tray, 10 trays per box. exception: ccm02-1no-35, 20 per tray, 10 per box. 13 ccm02 mk i ccm02 mk i is a connector with landing contacts. features ?available with 8 through hole contacts. ?100,000 card insertion cycles. ?the contacts do not touch the card until it is almost fully inserted - a minimal wiping action removes any non-conductive material. ?the connector has been designed to give a positive feel as the card is fully inserted. ?for added reliability, the integrated card end-travel switch (which is normally open) is sealed against dust and grit. part number number of contacts packaging multiple ccm02-1n0-3 8 300 ccm02-1n0-32 8 300 CCM02-1N0-35 8 with extended cover 200 construction mechanical data contact electrical data environmental data switch electrical data ordering code packaging
14 dimensions are shown in mm dimensions subject to change www.ittcannon.com dimensional drawings ref 50,4 4,3 +0,1 0 5,8 55,55 b 40 1 35,25 24 51,5 x 0,3 0,6 0,3 a b 9,05 6 18,68 5,08 3,1 0 -0,05 0,1 a b ref 2 ref 2 3,1 38,1 1,6 7,62 7,62 1 5,8 marking : designation & date-code card stop pcb layout 24 9,05 38,1 1 5,08 51,5 14,5 18,68 7,62 7,62 7,62 (component side) (3x2,54) 5 1 6 ccm02-1no-32 ccm02 mk i ccm02-1no-32 (8 contacts through hole) unless otherwise stated, tolerances are 0,10 mm drawings shown for reference only. for other part numbers please consult your local cannon customer service center.
|
